|Color||Clear to Pale yellow,non fluorescent|
|Packaging Size||20 litre containers and 205 litre drums|
|Density||0.76 - 0.80 g/ml|
|Flash Point||Greater than 93 Degree Centigrade|
|Sulfur Content||less than 1000 ppm|
|Chloride content||Less than 1000 ppm|
Magnaglo® Carrier II Oil is designed to promote enhanced magnetic particle mobility and suspension.
Magnaglo® Carrier II Oil is used to suspend wet (oil) method magnetic particles when water is not used as a suspension vehicle. It is virtually odorless and has a flash point in excess of 200°F allowing it to meet OSHA requirements for a Class III B liquid.
ASTM E-1444, ASTM E-709, Pratt & Whitney PMC 1887, A-A-59230, ASME B & PV Code, Sec. V, AMS-2641
Method of Use
MX/MG Carrier II is supplied ready to use. The magnetic particles should be added to the carrier at the recommended concentration and thoroughly mixed to ensure an even suspension. The bath strength should be checked prior to use.
Components should be cleaned prior to testing to provide a suitable test surface and to prolong bath life. This can be easily and effectively achieved by using a solvent cleaner such as Spotcheck SKC-S or SKC - I.
The bath must be mixed thoroughly prior to use and must be kept agitated during testing.
Rated by 14 Users