Magnetic Particle Inspection Equipment
Magnaflux M-Series Mobile Power Packs
| Model Name/Number | M-Series Mobile Power Packs Electromagnetic Current Generators for AC or HWDC Magnetization |
| Automation Grade | Manual |
| Brand | Magnaflux |
| Type Of Testing Machines | Magnetic Particle Testing |
| Current | 4000 & 6,000 amp three phase rectified to FWDC output |
| Country of Origin | Made in India |
| Duty Cycle | 0.5 seconds on,10 Seconds off (5% with Maximum of 5 seconds) |
| Voltage | 230,380,415,460,575,50 or 60 hertz |
| PSI | Minimum 80 PSI with 5 SCFM capability |
Our M-Series mobile power pack enables you to test parts which are too large and/or too heavy to be inspected using standard fixed-position MPI test benches. Ruggedly built, you can take the M-Series to the part that needs to be tested and it will locate defects in any direction, using prods, central conductors or coils.
M-Series magnetic power packs are available in two configurations: M-500 and M-530.
| M-500 | M-530 | ||
|---|---|---|---|
| Contact Current Capacity (amps) | AC | 4,000 | 6,000 |
| HWDC | 4,000 | 6,000 | |
| Rated With | 120 mm² x 5m x 2 Mag Cables | 120 mm² x 5m x 4 Mag Cables | |
| Dimensions | 1020 mm length x 750 mm width x 910 mm height | 1020 mm length x 750 mm width x 910 mm height | |
| Weight | 340 kg | 410 kg | |
| Part number | F08002 | F08003 | |
Magnaflux MPI Portable Power Pack
| Output | 1500 amps,AC |
| Length | 22" (55.9 cm) |
| Width | 9.5" (24.1 cm) |
| Height | 9.5" (24.1 cm) |
| Available Voltages | 230,460,50 or 60 Hertz; single phase power |
| Line Current | 42 amps |
| Maximum Duty Cycle | 2 minutes |
| Unit Weight | 93 lbs (42.2 kg) |
Portable Power Packs are convenient and economical inspection units that are used in a wide range of magnetic particle applications that require only moderate power. The Magnaflux Portable Power Packs are ideal for large or heavy parts, in-service mobile equipment, or job-site welds.
- Find surface defects with AC current; switch cable connection to half wave DC (HWDC) for near-surface flaws
- Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
- Infinitely variable current control
- Demagnetize your parts in AC mode by slowly turning the current dial to zero
- Built-in automatic-reset circuit breaker
- May be used as the main power source for the Magnaflux MAG Kit modular bench inspection system
Magnaflux Magnetic Particle Inspection Equipment - AHD-Series Magnetic Benches
| Material | Stainless Steel |
| Automation Grade | Semi-Automatic |
| Type Of Testing Machines | Magnetic Particle Testing |
| Model Name/Number | Magnaflux Magnetic Particle Inspection Equipment MD series Multi- Directional Unit |
| Flux Flow Coil | 16 Inch Coil (40 cm) in lieu of the Flux Flow Coils |
| Tank Fluid Capacity | 20 Gallon (75 Liter) |
| Brand | Magnaflux |
| Country of Origin | Made in India |
| Foot Print | 226cm x 104 cm |
| Flux Flow Coils | 16 Inch |
| Current Output | 6000 amp FWDC/HWDC or 5000 amp AC multidirectional output; current capability at contacts |
Our test bench units set the standard for MPI inspection, providing the flexibility and field intensity to find surface and sub-surface defects across a wide range of parts. In addition, they have the versatility of using AC ,HWDC or FWDC magnetisation, and both outputs are independently adjustable to set each magnetic field to circular or longitudinal. Magnetisation shot time is also adjustable, allowing better development of indications.
| Magnaflux Product | Description | Part Number |
|---|---|---|
| AHD-5020 | Combination shot Magnetization of 2000 Amps 1 Phase AC & HWDC, 2 Outputs - Contacts, 10" (26 cm) ID Coil, Voltages Available (415V or 380V), Maximum Part Length: 500mm, Maximum Part Diameter : 75mm | F04106 |
| AHD-5020D | Multi Directional Magnetization of 2000 Amps 1 Phase AC & HWDC, 2 Outputs - Contacts, 10" (26 cm) ID Coil, Voltages Available (415V or 380V), Maximum Part Length: 500mm, Maximum Part Diameter: 75mm | F04107 |
| AHD-1020 | Combination shot Magnetization of 2000 Amps 1 phase AC & HWDC, 2 Outputs - Contacts, 10 (26cm) ID Coil Voltages Available (415V or 380V), Maximum Part Length: 1000mm, Maximum Part Diameter: 75mm | F04122 |
| AHD-1020D | Multi Directional Magnetization of 2000 Amps; 1 phase AC & HWDC, 2 Outputs - Contacts, 10" (26cm) ID Coil Voltages Available (415V or 380V), Maximum Part length: 1000 mm, Maximum Part Diameter: 75mm | |
| AHD-1040 | Combination shot Magnetization of 4000 Amps 1 Phase AC & HWDC, 2 Outputs - Contacts, 12" (30cm) ID Coil, Voltages Available (415V or 380V), Standard Coil may be substituted for 16" or 20" ID Coil (41cm, 51cm or 63.5cm). Maximum Part Length: 1000mm, Maximum Part Diameter: 90mm | F04108 |
| AHD-1040D | Multi Directional Magnetization of 4000 Amps 1 Phase AC & HWDC, 2 Outputs - Contacts, 12" (30cm) ID Coil, Voltages Available (415V or 380V), Standard Coil may be substituted for 16" or 20" ID Coil (41cm, 51cm or 63.5cm). Maximum Part Length: 1000mm, Maximum Part Diameter: 90mm | F04109 |
| AHD-1060 | Comibination Shot Magnetization of 6000 Amps 1 Phase AC & HWDC, 2 Outputs - Contacts, 12" (30cm) ID Coil, Voltages Available (415V or 380V), Standard Coil may be substituted for 16", 20" or 25" ID Coil (41cm, 51cm or 63.5cm) Maimum Part length: 1000 mm, Maximum Part Diameter: 90mm | F04112 |
| AHD-1060D | Multidirectional Magnetization of 6000 Amps 1 Phase AC & HWDC, 2 Outputs - Contacts, 12" (30cm) ID Coil, Voltages Available (415V or 380V), Standard Coil may be substituted for 16", 20" or 25" ID Coil (41cm, 51cm or 63.5cm). Maximum Part length: 1000 mm, Maximum Part Diameter: 90mm | |
| AD-945 | Combination shot Magnetization of 4000 Amps 1 Phase AC & 5000 1 Phase FWDC, 2 Outputs - Contacts, 12" (30cm) ID Coil, Voltages Available (415V or 380V), Standard Coil may be substituted for 16", 20" or 25" ID Coil (41cm, 51cm or 63.5cm). Maximum Part Length: 1000mm, Maximum Part diameter: 90mm | F04001 |
*Your information is safe with us.
Y-7 AC/DC Electromagnetic Yoke
| Model Name/Number | Magnaflux Y7 Yoke |
| Brand | Magnaflux |
| Usage/Application | Magnetic Particle Inspection |
| Frequency | 50 Hz |
| Input Supply | 220V |
| Output Range | Current Ranges 1.6 ~ 2.2 Amps |
| Phase | 1 Phase |
| Weight | 4.56 lbs |
| Cord Length | 10 feet |
| Warranty | 1 year |
| Elec. Requirement | 115V,60Hz or 230V/50-60Hz |
| Leg Span | 0" - 11" |
The Y-7 is a durable, high-strength AC/DC magnetic yoke designed to detect surface and sub-surface indications in the most rugged applications.
Featuring sealed chemical-resistant construction, articulating legs to contour to any part shape and robust strain-relieved twelve-foot cord for field use, the Y-7 is ideal for inspection of welds and other remote testing.
Solid-state controls allow the operator to use AC magnetic fields for surface indications or DC magnetic fields for sub-surface indications to meet all inspection needs.
Benefits & Features
- Sealed, durable construction
- Chemical and abrasion resistant
- AC and DC operation options for surface and sub-surface inspection
- Exceeds ASTM lifting specifications
- Individual serial number for each yoke
- Item Code: Y1AC
Explore more products
Magnaflux Carrier II NDT-Approved Petroleum Base Suspension Vehicle
Get Best QuoteMagnaflux 14A Wet Method Fluorescent Magnetic Particles
Get Best QuoteMagnavis-7HF Black Premix Wet Method Dry Powder Concentrate
Get Best QuoteSpotcheck SKD-S2 Non Aqueous Developer
Get Best QuoteMagnaflux SKL-WP Water Washable Visible Dye Penetrant
Get Best QuoteMagnaflux ZL-27A PE Level 3 Post Emulsifiable Fluorescent Penetrant
Get Best Quote