Magnetic Particle Inspection Accessories
These magnetic particle testing accessories will help you optimize your mag particle testing processes so you have a complete solution to meet all your non-destructive testing application needs.
Just click on any of the accessory categories below to find out more about these products, or contact us for assistance in choosing the accessory that is right for your process.
Magnetic Particle Test Pieces - Magnetic Particle Performance Evaluation Devices
| Magnetization Material | Iron |
| Testing Current Type | Full Wave DC |
| Testing Type | Magnetic Particle Inspection |
| Brand | Magnaflux |
| Specifications Compliance | ASTM E709-08, ASTM E1444, BPVC |
| NDT Type | Magnetic Particle Inspection |
These test pieces for magnetic particle inspection will help you maintain your mag particle process by verifying magnetic particle performance. Use to check for mag particle deterioration, to compare different magnetic powders, to verify sensitivity or visibility or to assure field direction and strength.
Magnetic Flux IndicatorsFlexible indicators used to detect directional orientation during the magnetic particle testing process. Each indicator contains three milled slots with widths of .0075", .009" and .010" that share a common depth.
The indicators are manufactured from permeable magnetic steel sandwiched between two brass plates and designed for repeated use in setting and monitoring magnetic field strength in wet and dry MPI applications.
QQIsQuantitative Quality Indicator Test Piece Shims
Quantitative Quality Indicators (QQI) are magnetic particle test piece shims with artificial defects used to verify field direction and relative strength. QQI's are also used to balance multi-directional fields and to increase productivity by minimizing magnetizing shots. The QQI indicator shims are packaged in sets of five.
|
Magnaflux Part Numnber |
AS-5371 Name |
Kermit Seike Product |
Description |
|
625551 |
CX-230 |
KSC-230 |
Circle-cross, 0.002” shim thickness, 30% notch depth |
|
625552 |
CX4-230 |
KSC-4-230 |
Mini circle-cross, 4 per shim, 0.002” shim thickness, 30% notch depth |
|
625553 |
CX-430 |
KSC-430 |
Circle-cross, 0.004” shim thickness, 30% notch depth |
|
625554 |
3C2-234 |
KSCT-234 |
Three circles, 0.002” shim thickness, 20% / 30% / 40% notch depth |
The AS-5282 Tool Steel Ring (formerly Ketos Ring) is a magnetic particle test piece with pre-drilled holes to simulate subsurface discontinuities. It offers a reliable method of verifying magnetic particle system performance when actual test parts with discontinuities are not available.
Magnetic Particle Test BarTest bar contains coarse and fine surface and subsurface defects in both directions. Meets or exceeds most industrial and military standards for artificial test specimens.
Pie Field Indicator
| Usage/Application | Magnetic Particle Inspection |
| Brand | Magnaflux |
| Model Name/Number | Pie Gauge |
| Technique | Magnetic Particle Inspection |
| Country of Origin | Made in India |
| Specifications Compliance | ASME BPVC Section V Article 7 - ASTM A275 - ASTM E709 - ASTM E1444 - ASTM E3024 |
The Magnetic Particle Pie Gauge is used as an aid in determining the direction of magnetic fields for detection of discontinuities in ferrous metals.
Dry Powder Application Bulb
| Material | Puffer Bulb with Aluminium cap |
| Brand | Magnaflux |
| Type Of Testing Machines | Magnetic Particle Testing |
| Country of Origin | Made in India |
| Part Number | 501232 |
| Compliance | ASTM E1444 |
| Spray Type | Dry Powder Spray |
We are one of the leading manufacturers of Dry Powder Application Bulb.
Explore more products
Magnaglo14A Redi-Bath Liquid Concentrate
Get Best QuoteMagnavis 7C Black Concentrate
Get Best QuoteMagnaflux SKL-WP Water Washable Visible Dye Penetrant
Get Best QuotePost Emulsified Lipophilic Fluorescent Inspection System
Get Best QuoteMagnaflux MPI Portable Power Pack
Get Best QuoteMagnaflux Magnetic Particle Inspection Equipment - AHD-Series Magnetic Benches
Get Best Quote