Send Email
Send SMS
Search
ITW India Private Limited, Magnaflux Division


Test Block Panels

Magnaflux test panels provide feedback on the continuing sensitivity and performance of your penetrant processing system.

Magnaflux NiCr test panels are ideal penetrant sensitivity comparators. They come in pairs, with panel set crack depths available in 20 microns. NiCr test panels allow "in use" Zyglo® penetrants to be compared against "new, unused" product to determine if the penetrant is performing properly.

The Magnaflux TAM Panel (Pratt and Whitney TAM #146040) monitors both sensitivity and washability of Zyglo® liquid penetrants. The test panel is meant to detect "sudden" penetrant system changes and to ascertain that all parts of the penetrant processing system are functioning in the proper manner.

The KDS Panel is a Known Defect Standard used for daily system performance analysis.  The test panel is used to monitor a penetrant system for "sudden" changes and verify performance of "in use" materials.


NiCr Penetrant Test Panels

REQUEST CALLBACK

NiCr Penetrant Test Panels
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Length 100mm 2mm
Width 35mm 2mm
Thickness 2mm 0.2mm
Part No506252
Brand Magnaflux

NiCr Test Panels are ideal penetrant sensitivity comparators. They come in pairs, with panel set crack depths available in 10, 20, 30 and 50 microns.

Yes! I am Interested

TAM Panel

REQUEST CALLBACK

TAM Panel
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
BrandMagnaflux
Part Number198055
Type Z5 Test Panel
Compliance standard146040, ASTM E1417, AMS 2647D

The panel is meant to detect "sudden" penetrant system changes and to ascertain that all parts of the penetrant processing system are functioning properly. 



Additional Information:

  • Item Code: Z5TestPanel
Yes! I am Interested

KDS Panel

REQUEST CALLBACK

KDS Panel
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
GradeManual
BrandMagnaflux
MaterialSS
Size 4 x 6 inches

The KDS Panel is a Known Defect Standard used for daily system performance analysis. The test panel is used to monitor a penetrant system for "sudden" changes and verifies the performance of "in use" materials.

 

Yes! I am Interested

Tool Steel Test Ring

REQUEST CALLBACK

Tool Steel Test Ring
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Material SS
Part Number159999
Brand Magnaflux
Shape Round

The Magnaflux Tool Steel Test Ring is a mag particle test Piece with pre-drilled holes to simulate subsurface discontinuities. It offers a reliable method of verifying magnetic particle system performance when actual test parts with discontinuities are not available.

 

Yes! I am Interested

Quantitative Quality Indicator Test Pieces

REQUEST CALLBACK

Quantitative Quality Indicator Test Pieces
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Thickness .002" to .004"
Brand Magnaflux
Specifications Compliance ASTM E709-08, ASTM E1444, BPVC

Quantitative Quality Indicators (QQI) are magnetic particle test pieces with artificial defects used to verify field direction and relative strength. QQI's are also used to balance multi-directional fields and to increase productivity by minimizing magnetizing shots. The QQI indicator shims are packaged in sets of five.

Part Numbers:

  • 625551: Standard QQI Model# KSC-230. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .002” thick. Self-adhesive.
  • 625552: Miniature QQI Model# KSC-4-230. Similar to KSC230, except miniature design for small areas on test part. The four circles may be cut apart for individual use. Flaw depth of 30% of Shim thickness, .002” thick.
  • 625553: Standard QQI Model# KSC-430. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .004” thick.
  • 625554: Variable Depth QQI Model# KSCT-234. Used for more quantitative work, three concentric circular flaws of differing depth. Flaws depth of 20%/30%/40% of Shim thickness, .002” thick. Self-adhesive.
  • 625555: Variable Depth QQI Model# KSC4-234. Used for more quantitative work, three concentric circular flaws of differing depth. Flaws depth of 20%/30%/40% of Shim thickness, .004” thick.
Yes! I am Interested

Aluminum Test Block

REQUEST CALLBACK

Aluminum Test Block
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Part NumberD03015
Material Aluminium
Brand Magnaflux

The Aluminum Test Block is an aluminum test piece that measures 3” x 2” x 3/8” with a 1/8” wide groove that splits the face in half. The test block is used to check the strength of “in-use” penetrants. This is done by processing one half of the block with “used” penetrant, and the other half with fresh penetrant.

Yes! I am Interested

Continuous Method Test Block

REQUEST CALLBACK

Continuous Method Test Block
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Product CodeF05.0725
Brand Magnaflux
Material Copper

Magnaflux continuous method test blocks are used to check for proper magnetizing on wet horizontal MPI units.

Continuous method test blocks provide a convenient check for the use of proper magnetizing techniques on wet horizontal MPI units. Crack indications form on the test blocks when current flow and bath concentrations are at adequate levels.

Yes! I am Interested

Magnetic Flux Indicators

REQUEST CALLBACK

Magnetic Flux Indicators
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Specifications Compliance ASTM E709-08, ASTM E1444
Brand Magnaflux
Packaging 5 indicators per package

Flexible indicators used to detect appropriate levels of magnetic field strength and directional orientation during the magnetic particle testing process. Each indicator contains three milled slots with widths of .0075", .009" and .010" that share a common depth.

The indicators are manufactured from permeable magnetic steel sandwiched between two brass plates and designed for repeated use in setting and monitoring magnetic field strength in wet and dry MPI applications.

Yes! I am Interested

Magnetic Particle Test Bar

REQUEST CALLBACK

Magnetic Particle Test Bar
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Material Aluminium
Brand Magnaflux
Form Bar

Test bar contains coarse and fine surface and subsurface defects in both directions. Meets or exceeds most industrial and military standards for artificial test specimens.

Yes! I am Interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
ITW India Private Limited, Magnaflux Division
Ramu Dosapati (General Manager)
Plot No. 51, 52, 207 & 208, Phase 2, IDA, APIIC Pashamylaram, Medak, 35 KM From Hyderabad,
Hyderabad - 502307, Telangana, India
Call Us: 
Call Response Rate: 58%
Share Us :
F G T L



Home  |   About Us   |  Our Product Range  |  Site Map  |   Contact Us   |   Mobile Site

© ITW India Private Limited, Magnaflux Division. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

ITW India Private Limited, Magnaflux Division